You are here: Register Set > Burst Mode Enable (Offset=1029; Index=65, RB='1')
|
STX104 Reference Manual
|
   |
   |
Burst Mode Enable (Offset=1029; Index=65, RB='1')
|
STX104 Reference Manual
|
|
|
ADC Burst Mode Enable Register. DAS1602 Compatible Configuration Register. In 10-bit address decode mode, the DAS1602 compatible registers are also accessible through the indexed register set.
Offset=0x405, RB=X. Also located at: Index=0x41, Byte 0, RB='1'.
|
D7 |
D6 |
D5 |
D4 |
D3 |
D2 |
D1 |
D0 |
|
ABME7 |
ABME6 |
ABME5 |
ABME4 |
ABME3 |
ABME2 |
ABME1 |
ABME0 |
|
NAME |
DIRECTION |
DEFAULT |
DESCRIPTION |
|
ABME[7:0] |
w |
0x00 |
ADC-Burst Mode Enable Register. On power-up or reset the ADC-burst mode is disabled. This register is only available if FE bit is true (DAS1602 Functions are enabled). Writing a 0x00 to this register disables ADC-burst mode. Writing 0x40 (6410) to this register enables ADC-burst mode. |
ADC Burst Mode Enable Register. On power-up or reset the ADC-burst mode is disabled. This register is only available if FE bit is true (DAS1602 Functions are enabled). Writing a 0x00 to this register disables ADC-burst mode. Writing 0x40 (6410) to this register enables ADC-burst mode.
|
Copyright © 1997-2008 by Apex Embedded Systems. All rights reserved. Updated on Wednesday, April 02, 2008.
|
|
What do you think about this topic? Send feedback!
|
Description